APC reference
Solid
One colour, high gloss or satin. Clean and modern.
Field video
02 — Epoxy
Epoxy, poured.
Seamless flake and solid resin floors, roofs and balconies. Tough, easy to clean, and a joy to watch go down.
- System
- 0.5–6 mm
- Walk on
- ~24 h
- Full cure
- ~7 days
- Typical garage
- 2–3 days
What it is
One piece, wall to wall.
Epoxy is a two-part resin that bonds into concrete and cures into one hard, seamless surface. It resists oil, water and most chemicals, and it is easy to keep clean.
The coating is only as good as the slab under it. We diamond-grind, repair cracks and moisture-test before any resin goes down. On roofs and balconies we screed to falls so water runs to the drain, then finish with a UV-stable topcoat.
Anatomy of the finish
Section
Creative Caulkers · Studio film
Typical system
Sydney
Where it works
Made for real rooms.
Garages
A bright floor that resists oil and tyre marks.
Roofs & balconies
Screeded to falls, sealed against water and sun.
Workshops
Hard-wearing floors for busy work areas.
Showrooms & kitchens
Seamless, easy-to-clean floors for retail and food areas.
Finishes
Four systems. One seamless floor.
Photographic finish references from All Purpose Coatings. Our own site work follows below.
APC reference
Flake
Broadcast flakes hide dust and add grip and texture.
APC reference
Quartz
Coloured quartz for heavy traffic and slip resistance.
APC reference
Metallic
Pigments that move and pool for a liquid, marbled look.
On the tools
From the field.
Field video
The prep: grinding the concrete before coating.
Field video
A closer look at the floor before coating.
Field photo
The finish: a seamless flake garage floor.
Field video
Flake texture, seen up close on site.
Field video
Roof coating details around the drain and upstands.
Our process
Five steps. No shortcuts.
- 01
Read
We read the surface before we quote: moisture, level, movement and light.
Moisture · level · movement - 02
Prepare
Grind, patch, prime and mask. Most of a great finish is preparation nobody sees.
Prep ≈ half the job - 03
Apply
By hand. Every bead, every coat, every pass of the trowel.
Hand-applied - 04
Cure
We work to the product’s cure times and the day’s weather, not to a rushed deadline.
Temp · humidity · time - 05
Reveal
A walk-through, a care guide, and we come back if anything is not right.
Care guide included
FAQ
Epoxy, asked.
How much does epoxy flooring cost?
It depends on floor area, the condition of the slab, crack repairs, and the system you choose: solid, flake, quartz or metallic. We give a free, fixed quote after a site inspection.
How long does epoxy last?
A well-prepared epoxy floor lasts many years. Life depends on traffic. Heavy-duty systems suit vehicles and equipment.
Can you coat a roof or balcony?
Yes. We screed to falls so water drains properly, then seal with a UV-stable topcoat. We check drains and upstands first.
How long does the job take?
A typical garage takes 2 to 3 days. We give exact walk-on and drive-on times in your quote.
What surfaces can it go on?
Mainly concrete. The slab must be dry, so we moisture-test first. Old coatings are checked and removed if needed.
Start a project
Let’s finish it.
- Phone0433 775 126
- Emaildave@creativecaulkers.com.au
- Instagram@creativecaulkers
- HoursMon–Fri 7am–5pm · Sat 8am–12pm
- AreaGreater Sydney, NSW