Warm greige
Soft and calm. Our most asked-for bathroom tone.
Studio render
04 — Microcement
Microcement, skinned.
A mineral skin a few millimetres thick for floors, walls, showers and benchtops. No grout lines. Often no demolition.
- Total
- ≈ 2–3 mm
- Grout lines
- Zero
- Over tiles
- Often
- Bathroom
- 4–6 days
What it is
A new surface, not a new room.
Microcement is a thin cement and polymer coating, usually 2 to 3 mm thick, applied by hand. It gives one seamless, modern surface across floors, walls, showers and benchtops.
It can often go straight over sound existing tiles, so there is less demolition, less mess and a faster job. We lay Rasofix base coats over reinforcing mesh, then the fine finish coats. Sealed properly, it suits showers and wet areas. Showers get a compliant waterproof membrane under the system.
Anatomy of the finish
Section
Creative Caulkers · Studio film
Typical system
Sydney
Where it works
Made for real rooms.
Bathrooms & showers
Walls, floors and shower bases in one seamless finish.
Kitchens & benchtops
Splashbacks, benchtops and islands with a concrete look.
Floors & stairs
One continuous surface through the home.
Retail & hospitality
Modern finishes for shops, cafes and offices.
Finishes
Four tones. No grout.
Studio renders, tinted to suit your space on the day.
Concrete grey
Cool, architectural, and good with black fixtures.
Bone white
Bright and sculptural, made for curves and stairs.
Sand
Warm and earthy. Lovely on vanities and benchtops.
Studio
Studio studies.
Studio render
The tiles stay. The grout lines go.
Studio render
Splashback and island in concrete grey.
Studio render
One surface, wall to floor to ceiling.
Studio render
Shower niche, rounded and seamless.
Our process
Five steps. No shortcuts.
- 01
Read
We read the surface before we quote: moisture, level, movement and light.
Moisture · level · movement - 02
Prepare
Grind, patch, prime and mask. Most of a great finish is preparation nobody sees.
Prep ≈ half the job - 03
Apply
Rasofix base coats over mesh, then fine finish coats by hand, then the sealer.
Hand-applied - 04
Cure
We work to the product’s cure times and the day’s weather, not to a rushed deadline.
Temp · humidity · time - 05
Reveal
A walk-through, a care guide, and we come back if anything is not right.
Care guide included
FAQ
Microcement, asked.
How much does microcement cost?
Price depends on area, surface condition, whether we go over tiles or remove them, and the colour and texture. We give a free, fixed quote after a site inspection.
Can it go over my existing tiles?
Often, yes, when the tiles are sound and well bonded. We check them first. Showers get a compliant waterproof membrane under the system.
How long does microcement last?
With good sealing and normal care it lasts many years. Busy floors may need a fresh sealer coat every few years.
How do I clean it?
Use a soft mop or cloth with a pH-neutral cleaner. Avoid bleach, strong acids and scouring pads.
How long does the job take?
Most bathrooms take 4 to 6 days, including drying time between coats. We confirm the timeline in your quote.
Start a project
Let’s finish it.
- Phone0433 775 126
- Emaildave@creativecaulkers.com.au
- Instagram@creativecaulkers
- HoursMon–Fri 7am–5pm · Sat 8am–12pm
- AreaGreater Sydney, NSW